Hi =^-^=
I have a Loopy capture card in my small 3DS, and would like to install a hack called ARM9LoaderHax to it. This involves an operation that if it goes wrong can brick the system.
A 3DS bricked in this manner can be fixed by having a backup of the eMMC flash ROM chip (the "NAND", as 3DS hackers call it). However, restoring from a brick requires soldering wires to the motherboard in order to attach the eMMC chip to an SD card interface.
Is it too much risk to do this to a capture-carded 3DS, because the board makes it difficult to reach? I've never opened up my capture-carded 3DS to know.
Thanks,
Melissa
Exploiting a capture-carded 3DS
Re: Exploiting a capture-carded 3DS
No it is not differnt from one without
See, I've done some here:
http://www.konsolenpunkt.de/forum/viewt ... f=22&t=395
Regards
Stefan
See, I've done some here:
http://www.konsolenpunkt.de/forum/viewt ... f=22&t=395
Regards
Stefan