Hello,
I bought your capture card about 2 years ago, and up until a couple of months ago it was fine. Since then my bottom screen has had this yellowish tint. The only thing that I've changed throughout the past couple of years is updating to the latest software. Here are some pictures of the problem. http://gyazo.com/4075e0deb5b6b98ea5314ebce7368222 http://gyazo.com/e8285b5e1eaa834b149f361eca033460 http://gyazo.com/6b0022023b22f21e89dcb1dc4d6d6d8e. Can you help me fix this problem?
Bottom screen has a yellow glow
Re: Bottom screen has a yellow glow
Sorry, this was my post, forgot to sign inGuest wrote:And in case you were wondering, I tried redownloading the driver, downloading an earlier version, and redownloading the newest version: all of which did not fix the problem
Re: Bottom screen has a yellow glow
A yellow screen means there's a bad connection between the board and 3DS. It's either at the cable connector (more likely), a bad solder connection to the 3DS mainboard (less likely), or a problem with the capture board itself (even less likely). You can try reconnecting the cable, that might fix it. Or just send it back and I'll take care of it.
Re: Bottom screen has a yellow glow
Okay, so when I send my 3ds back in, should I include the link to this post so you know what the issue is?loopy wrote:A yellow screen means there's a bad connection between the board and 3DS. It's either at the cable connector (more likely), a bad solder connection to the 3DS mainboard (less likely), or a problem with the capture board itself (even less likely). You can try reconnecting the cable, that might fix it. Or just send it back and I'll take care of it.
Re: Bottom screen has a yellow glow
Yes. Or just write what the issue is