DS Capture Card Screen/Capture Problems

Post Reply
PotatoGamur
Posts: 2
Joined: Mon Aug 08, 2016 8:06 pm

DS Capture Card Screen/Capture Problems

Post by PotatoGamur » Thu Aug 11, 2016 5:32 pm

So a few days ago my DS capture kit arrived. I plugged the ribbon cables in, and tested the capture card. It worked flawlessly. Then, I stuck the adhesive down, put the casing of the system on, and tested the board again. Unfortunately, the top screen no longer works, and the capture is tinted pink/red (here's the capture: http://imgur.com/a/pEvyZ :shock: ). I consulted the FAQ, which told me to reinsert the ribbon cables into the board. After numerous attempts, I've yielded no results. Does anyone know what to do? (Loopy, I already sent you an email, I need help! :( )

Here's a couple photos of the screens, and the board. It may be worth noting that the small cable is a little bent.
http://imgur.com/a/5DHuJ
http://imgur.com/a/ndIwa
http://imgur.com/a/Iu5BV
http://imgur.com/a/mxwuc

Post Reply