Capture Device not found

User avatar
Tecd0c
Posts: 197
Joined: Mon Jun 24, 2013 12:59 pm
Location: Germany
Contact:

Re: Capture Device not found

Post by Tecd0c » Wed Oct 19, 2016 2:45 pm

Not easy at all, it's nothing you just desolder and simply stick on in two minutes :roll:

Removing it without damaging the traces is difficult, because you are pulling couple of things at the same time, plus applying lots of heat will damage the traces too.
Then putting it back on place, that it holds all the inserts and pulls for a long time, isn't easy as well...

If you are really interested of doing it yourself, then start practise on something you got of the junkyard.
So if something goes wrong you do not loose 150$.

Do youself a favour and better ask Neal (Loopy) to do the replacement for you. As he has done lot of that and pay what he wants for the work...

User avatar
loopy
Site Admin
Posts: 2292
Joined: Wed Sep 19, 2012 7:44 pm
Contact:

Re: Capture Device not found

Post by loopy » Sun Oct 23, 2016 3:47 am

americanbaconn wrote:hello on my 3ds viewer it says capture device is not found
I'm guessing this is a katsukity board? Only his software gives that error message, you would see only a black screen on mine.

Post Reply