Ds With White Flashing Screen

Post Reply
pezoneden
Posts: 172
Joined: Tue Dec 06, 2016 10:54 pm

Ds With White Flashing Screen

Post by pezoneden » Sat Sep 30, 2017 9:18 pm

Hey ya'll I just got a card installed in my DS and it works great, until I boot up the 3ds software and try to run my 3ds and the DS simultaneously. The DS capture just starts blinking white. Once I close the 3ds capture software it works fine again. Any tips on getting them running at the same time would be great ;) thank you. Here is a video of said problem http://www.youtube.com/watch?v=K43X2yZHbDY

pezoneden
Posts: 172
Joined: Tue Dec 06, 2016 10:54 pm

Re: Ds With White Flashing Screen

Post by pezoneden » Thu Oct 05, 2017 4:05 pm

Found a temporary solution by lowering my resolution within the webcam settings....... :roll:

Guest

Re: Ds With White Flashing Screen

Post by Guest » Thu Oct 12, 2017 3:26 pm

Are they sitting on the same USB strip? It could be that both are drawing too much power and your computer is having a hard time processing both. I have my DS connected quite far away from my webcam usb.

Here's how mine looks: https://www.youtube.com/watch?v=ccth-D5 ... N2HwySKT3D

pezoneden
Posts: 172
Joined: Tue Dec 06, 2016 10:54 pm

Re: Ds With White Flashing Screen

Post by pezoneden » Sat Oct 28, 2017 4:05 pm

That was a good idea. I did have both of the capture cards on the same hub. Once I plugged one of them directly into the pc's usb port, I was able to turn my webcams resolution back up to 1080 without the white flashing screen. Thanks for the advice.

Post Reply