If you want to swap SD cards, you have to use a screwdriver every time..
Can this screw up the board? What do we do?
A problem with making a capture board for the NN3DSXL...
-
- Posts: 38
- Joined: Mon Dec 30, 2013 11:14 pm
-
- Posts: 99
- Joined: Thu Sep 20, 2012 1:06 pm
Re: A problem with making a capture board for the NN3DSXL...
Well, we won't know until Loopy manages to figure out how to put the board in the New 3DS XL. By the looks of it, the back cover is pretty easy to take off as long as you have the specific screwdriver (#0), as is the microSD card itself.
-
- Posts: 38
- Joined: Mon Dec 30, 2013 11:14 pm
Re: A problem with making a capture board for the NN3DSXL...
Oh, well that's good.ShadowMario3 wrote:Well, we won't know until Loopy manages to figure out how to put the board in the New 3DS XL. By the looks of it, the back cover is pretty easy to take off as long as you have the specific screwdriver (#0), as is the microSD card itself.
Because I know the original 3DS board has the back covered by the plastic shell that covers the board.
Re: A problem with making a capture board for the NN3DSXL...
He's said the XL board will be in the system itself, so I would assume the N3DS XL would be similar. Even with the external card, removing the back and the card aren't super technical unless you're careless.
Re: A problem with making a capture board for the NN3DSXL...
I think it'll be easy to remove and screw back in, but just in case I'm putting a 32gb SD card in the 3DS so I won't have to worry about it anyway.