Pictures from Loopys new (old) 3DS Capture Cards
Re: Pictures from Loopys new (old) 3DS Capture Cards
Hmmm, how will this be installed if someone like me has already performed the controller mod in my 3ds xl? I tried asking this several times before i purchase this card but got no reply.
- desocietas
- Posts: 425
- Joined: Wed Jun 25, 2014 9:29 pm
Re: Pictures from Loopys new (old) 3DS Capture Cards
The installation/board isn't available for purchase yet. You might get more information/answers when he has them available for purchase.tmd02 wrote:Hmmm, how will this be installed if someone like me has already performed the controller mod in my 3ds xl? I tried asking this several times before i purchase this card but got no reply.
Re: Pictures from Loopys new (old) 3DS Capture Cards
If you look at my first Picture, http://www.konsolenpunkt.de/forum/viewt ... =583#p2326
you can see the flatcable, and there are some "holes" in there without traces going anwhere.
This is meant for Controller Mod installation afterwards.
So just release the couple points and solder the flatcable for the Capture Card XL then reatach through the holes the Controller Mod wires
Regards
Stefan
you can see the flatcable, and there are some "holes" in there without traces going anwhere.
This is meant for Controller Mod installation afterwards.
So just release the couple points and solder the flatcable for the Capture Card XL then reatach through the holes the Controller Mod wires
Regards
Stefan
Re: Pictures from Loopys new (old) 3DS Capture Cards
Aha, that is perfectly fine by me, thanks a lot!
I'm looking forward to make a review of the ultimate loopy 3Ds setup (if that is allowed)
I'm looking forward to make a review of the ultimate loopy 3Ds setup (if that is allowed)
Re: Pictures from Loopys new (old) 3DS Capture Cards
Of course, this would be nice
- desocietas
- Posts: 425
- Joined: Wed Jun 25, 2014 9:29 pm
Re: Pictures from Loopys new (old) 3DS Capture Cards
Awesome, thanks for the follow-up, Stefan! I thought you might know but didn't want to bug youTecd0c wrote:If you look at my first Picture, http://www.konsolenpunkt.de/forum/viewt ... =583#p2326
you can see the flatcable, and there are some "holes" in there without traces going anwhere.
This is meant for Controller Mod installation afterwards.
So just release the couple points and solder the flatcable for the Capture Card XL then reatach through the holes the Controller Mod wires
Regards
Stefan
-
- Posts: 4
- Joined: Mon Feb 06, 2017 2:07 am
Re: Pictures from Loopys new (old) 3DS Capture Cards
If I miss the capture card stock on this website does your online store cater to America as well or only European countries?
Re: Pictures from Loopys new (old) 3DS Capture Cards
Neal (Loopy) has no problem with that, he told me a while ago, but normally it should not be necessary...
-
- Posts: 37
- Joined: Wed Feb 24, 2016 6:32 pm
- Contact:
Re: Pictures from Loopys new (old) 3DS Capture Cards
Just got myself a shiny new (old) Zelda Link Between Worlds 3DS XL and am ready for these capture boards!