CuteCapture - Capture Software for Linux and Mac
Re: Cute(3)DSCapture - A Capture Software for Linux (and Mac)
I'm working on moving CuteDSCapture and Cute3DSCaputre into the same codebase. I think that might make it easier for VGMoose to get a new Mac Build for CuteDSCapture as well.
Re: Cute(3)DSCapture - A Capture Software for Linux (and Mac)
Shortly after posting, I applied vgmoose's instructions (for building C3C) to CDC. Not all of them worked properly I think, but I managed to get a working executable! So I'm using this for now.
It has some minor problems (mainly lag, especially when recording); not sure how much is due to my home-made build and how much to the program itself or the sub-optimal Mac screen recording capabiilties.
By the way, I found pretty annoying the round corners of macOS' windows when it comes to recording. Do you know any workaround?
It has some minor problems (mainly lag, especially when recording); not sure how much is due to my home-made build and how much to the program itself or the sub-optimal Mac screen recording capabiilties.
By the way, I found pretty annoying the round corners of macOS' windows when it comes to recording. Do you know any workaround?
-
- Posts: 28
- Joined: Fri Jan 03, 2020 8:05 pm
Re: Cute(3)DSCapture - A Capture Software for Linux (and Mac)
do you know if there is any way to install cute3dscapture or cutedscapture on Ubuntu mate 20.04?
Re: Cute(3)DSCapture - A Capture Software for Linux (and Mac)
Great software, I got it running smoothly with the build instructions. Thanks a lot for doing this!
However I found that my device does not seem to be supported. I got an old 2DS with capture card by Keity / Katsukity, *not* Loopy. There are drivers available for Windows and Mac in the first row of https://www.merki.net/info/?lang=en&v=3 ... #downloads, but not for Linux.
Any idea how to record Keity on Linux? Would Cute3DSCapture be capable of it? Need slight adjustments? Complete rewrite? I'd love a lead on this, before I dive into the source code.
(I also tried running the Windows driver with Wine - wihtout luck, the device wasnt recognized. Last option might be a Windows VM)
However I found that my device does not seem to be supported. I got an old 2DS with capture card by Keity / Katsukity, *not* Loopy. There are drivers available for Windows and Mac in the first row of https://www.merki.net/info/?lang=en&v=3 ... #downloads, but not for Linux.
Any idea how to record Keity on Linux? Would Cute3DSCapture be capable of it? Need slight adjustments? Complete rewrite? I'd love a lead on this, before I dive into the source code.
(I also tried running the Windows driver with Wine - wihtout luck, the device wasnt recognized. Last option might be a Windows VM)
Re: Cute(3)DSCapture - A Capture Software for Linux (and Mac)
Unfortunately I don't really understand what the issue is, as I'm not using a Mac... can you maybe share a screenshot?
Should work well if you follow the compilation instructions in the intro post. Did you try that and have a specific problem? If you can explain what problems you're facing, I can try to help morebooleangemini wrote: ↑Sun Oct 04, 2020 1:29 amdo you know if there is any way to install cute3dscapture or cutedscapture on Ubuntu mate 20.04?
![Smile :)](./images/smilies/icon_e_smile.gif)
This tool is only for loopys capture cards. It cannot work with Katsukitys cards by design. Please ask in the Katsukity forums for support on a Linux version, this forum is only about loopys cards, sorry.
Most likely a complete rewrite, but I know nothing of Katsukitys cards...
-
- Posts: 28
- Joined: Fri Jan 03, 2020 8:05 pm
Re: Cute(3)DSCapture - A Capture Software for Linux (and Mac)
Got it to work with the compiling instructions. had a friend compile it for me and send a zip but it didn't work, compiled it myself and it works perfectly on my raspberry pi 4gRuFtY wrote: ↑Fri Oct 16, 2020 12:41 pm
Should work well if you follow the compilation instructions in the intro post. Did you try that and have a specific problem? If you can explain what problems you're facing, I can try to help morebooleangemini wrote: ↑Sun Oct 04, 2020 1:29 amdo you know if there is any way to install cute3dscapture or cutedscapture on Ubuntu mate 20.04?![]()
Re: Cute(3)DSCapture - A Capture Software for Linux (and Mac)
Great, I'm glad to hear that!
Actually, if you're running it on a Pi, then I'm not sure if an Ubuntu package I could have provided would have run - I never compiled for ARM before and would probably have missed that. Out of curiosity, did your friend compile this on a PC? Because that might be why it didn't run on a raspi then, because of incompatible hardware architecture.
Actually, if you're running it on a Pi, then I'm not sure if an Ubuntu package I could have provided would have run - I never compiled for ARM before and would probably have missed that. Out of curiosity, did your friend compile this on a PC? Because that might be why it didn't run on a raspi then, because of incompatible hardware architecture.
-
- Posts: 28
- Joined: Fri Jan 03, 2020 8:05 pm
Re: Cute(3)DSCapture - A Capture Software for Linux (and Mac)
He mentioned that the arm architecture was supported because I had said that I wanted to run it on a raspberry pi. I would assume he compiled it with arm architecture in mind. I used the repository from Github to compile on my pi.gRuFtY wrote: ↑Fri Oct 16, 2020 3:00 pmGreat, I'm glad to hear that!
Actually, if you're running it on a Pi, then I'm not sure if an Ubuntu package I could have provided would have run - I never compiled for ARM before and would probably have missed that. Out of curiosity, did your friend compile this on a PC? Because that might be why it didn't run on a raspi then, because of incompatible hardware architecture.
Re: Cute(3)DSCapture - A Capture Software for Linux (and Mac)
Okay. Not sure what went wrong then, but oh well. At least it's running now ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: Cute(3)DSCapture - A Capture Software for Linux (and Mac)
Hi, I switched to Linux Mint 20 Cinnamon 64-bits just a few days ago, so I'm very new to this stuff, so sorry if this post sounds a bit silly! I first tried running the old DS capture software through PlayOnLinux, but the best I got from that was just a blank white window from both screens, even after changing a few settings, and trying different USB ports(also the same computer, and it worked alright on Windows 10). So I searched for capture software compatible with Linux and found this software. I've spent hours trying to compile the CuteDSCapture program, but I couldn't figure out how to. I tried lots of things, but nothing has really worked. I've installed the SFML stuff I think, and I have the code on my computer. I cd into the CuteDSCapture directory, and then when I try putting './autogen.sh && ./configure && make' from the github page into the termal, it says './autogen.sh: line 2: autoreconf: command not found' and I don't know what to do. Any help(either with getting the old software to run properly, or compiling this new software and getting it running) will be much appreciated! ![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)