Page 8 of 77
Re: N3DS progress..
Posted: Fri Jun 17, 2022 1:42 pm
by oak46
loopy wrote: ↑Fri Jun 17, 2022 5:25 am
I'm pretty sure it's
these. That's 4 per board. I can replace them with new ones.
Oh, awesome! When I order the cards then, I'll put an extra note in there about the boards. If you need to charge a little extra for labor/parts I would be willing to pay that as well, and hopefully it wouldn't be too much to get that done!
Re: N3DS progress..
Posted: Sun Jun 19, 2022 2:56 pm
by Celebi96
loopy wrote: ↑Wed Jun 15, 2022 6:22 am
loopy wrote: ↑Wed May 04, 2022 11:33 pm
Celebi96 wrote: ↑Wed Apr 27, 2022 1:31 am
Hi, just wondering if we can see any pics from the other side of the n3dsxl pcb where its soldered on?
I have some newer boards coming in a week or two, maybe then.
I haven't had a lot of time to work on it, getting ready for DS stuff. Latest board is built up though. I said I'd post pictures, so ... here's a picture.
Ooooh I'm very excited to see how these connect to the n3DSXL Motherboard, I have a Katsukity card but its so buggy
Re: N3DS progress..
Posted: Sat Jun 25, 2022 2:07 pm
by nickles
I have a 3DSXL that is already hacked and I was wondering if when your boards are ready can I send my 3DSXL in to be modded and how much would it be or can I purchase an already molded hacked system and what would the price be.
Re: N3DS progress..
Posted: Sat Jun 25, 2022 2:26 pm
by PeeJayBonobo
nickles wrote: ↑Sat Jun 25, 2022 2:07 pm
I have a 3DSXL that is already hacked and I was wondering if when your boards are ready can I send my 3DSXL in to be modded and how much would it be or can I purchase an already molded hacked system and what would the price be.
Unless it's a New3DSXL you speak of, Loopy isn't doing Old3DSXLs as of yet; he's doing New3DSXLs now, but they may be the same price as the model 1 3DSes.
Re: N3DS progress..
Posted: Sat Jul 02, 2022 10:19 pm
by Stinky
Been reading through this thread but I tend to get confused with all the abberviations for the different DS models, can someone confirm if there will eventually be a capture card avaliable for the New Nintendo 3ds (not XL). From what I understand this model is somewhat uncommon in the US.
Re: N3DS progress..
Posted: Mon Jul 04, 2022 7:44 pm
by desocietas
Stinky wrote: ↑Sat Jul 02, 2022 10:19 pm
Been reading through this thread but I tend to get confused with all the abberviations for the different DS models, can someone confirm if there will eventually be a capture card avaliable for the New Nintendo 3ds (not XL). From what I understand this model is somewhat uncommon in the US.
Loopy posted this in April:
loopy wrote: ↑Wed Apr 13, 2022 12:36 am
XL first. I haven't decided yet if n2DS or n3DS is next. Either way, the other models should come fairly quickly since it's just a change in form factor, no other design work needs to be done.
Re: N3DS progress..
Posted: Tue Jul 05, 2022 2:01 am
by nickeleye
What kind of output do his mods do? Is it upscaled, native? Output via USB or HDMI?
Re: N3DS progress..
Posted: Tue Jul 05, 2022 2:05 am
by PeeJayBonobo
nickeleye wrote: ↑Tue Jul 05, 2022 2:01 am
What kind of output do his mods do? Is it upscaled, native? Output via USB or HDMI?
I believe they're USB.
Re: N3DS progress..
Posted: Tue Jul 05, 2022 2:20 am
by Aar
nickeleye wrote: ↑Tue Jul 05, 2022 2:01 am
What kind of output do his mods do? Is it upscaled, native? Output via USB or HDMI?
Specifically, USB type C in this newest batch. Native resolution without compression I'm assuming.
Re: N3DS progress..
Posted: Tue Jul 05, 2022 3:04 am
by nickeleye
Aar wrote: ↑Tue Jul 05, 2022 2:20 am
nickeleye wrote: ↑Tue Jul 05, 2022 2:01 am
What kind of output do his mods do? Is it upscaled, native? Output via USB or HDMI?
Specifically, USB type C in this newest batch. Native resolution without compression I'm assuming.
That sounds good. My only question at that point would be if upscaling could be done on the PC side somehow. It would be nice to have a higher res for streaming or other content creation.