3dscapture.com

huh, how did he manage to fit the capture card in like that?

I assume Katsukity is using a smaller board or a combination of boards inside the console to maximize the use of space inside similar to the 3DS XL.

Dunno, buy one so I can see
Maybe it's still on the outside, with part of the Circle Pad Pro cut out to fit. Are there any pictures without a CPP?

I found this on Katsukity's blog:

Source: http://katsukity.blog123.fc2.com/blog-entry-600.html

Looks all internal to me.

Minimit wrote:I found this on Katsukity's blog:

Source: http://katsukity.blog123.fc2.com/blog-entry-600.html

Looks all internal to me.

That new USB port position is awful.

It is in that position so a Circle Pad Pro can be used while recording.

Minimit wrote:It is in that position so a Circle Pad Pro can be used while recording.

I know but it still looks "wrong". And there are only few games that support the CPP. I prefer my board from Loopy.

Rayquaza3010 wrote:

Minimit wrote:It is in that position so a Circle Pad Pro can be used while recording.

I know but it still looks "wrong". And there are only few games that support the CPP. I prefer my board from Loopy.

Same :/

wonder if there is a way to make it a dual charge/recording usb and replace the charger port.

The output on the 3DS charger is 4.6v @ 900mA, while a USB port can output 5v @ 100mA with a maximum of 500mA. This will not be enough to charge the 3DS and power the capture board.