3dscapture.com

Am I able to get this mod installed if I order a capture card/gcn controller mod in future? Seems pretty simple but not sure if there would be issues with room in the case with the other two mods as well (3 total). http://gbatemp.net/threads/nand-flash-dump-3ds.353263/

It requires 4-pin solution for output.

(few examples)
http://i61.tinypic.com/2qce4ht.jpg
http://tinyurl.com/l3se3e7
http://www.infinitydream.com/images/Ima ... nd_big.jpg
http://i.imgur.com/kuFaiX3.jpg

---

Also another quick question regarding the upcoming XL capture board, do you replace the IR port similar to the katsukity ones or mill the case (or allow for a choice of options)?

Cheers

If you have an XL, I think that NAND access mod is more elegant, and it may even work for the original model 3DSes

http://www.infinitydream.com/newsdesk_i ... esk_id=150

As for the IR Port

viewtopic.php?f=3&t=1810&start=90

It's intact.

GweiTheLeafChild wrote:If you have an XL, I think that NAND access mod is more elegant, and it may even work for the original model 3DSes

http://www.infinitydream.com/newsdesk_i ... esk_id=150

As for the IR Port

viewtopic.php?f=3&t=1810&start=90

It's intact.

Ah thanks, I skipped through that and thought it was the new 3ds for some reason. And I do like the idea of doing the nand dump port on the wrist-strap hole, less problems with cutting up the case.

Is it ideal for the GCN controller mod to be at the front of the case like in the previous mod done? What about having the input on the other wrist strap hole?

This is how I did it for a customer:

http://www.konsolenpunkt.de/forum/viewt ... f=23&t=229

The SD-Card Adapter stays under the bottom-plate

Is this for flashing the firmware to what ever you want?

Yes, but you always need your firmware first, since Nintendo is using unique security-keys for each console.

Tecd0c wrote:Yes, but you always need your firmware first, since Nintendo is using unique security-keys for each console.

Interesting, have anyone flashed 4.5 to a 2ds? I wonder.

suiken_2mieu wrote:

Tecd0c wrote:Yes, but you always need your firmware first, since Nintendo is using unique security-keys for each console.

Interesting, have anyone flashed 4.5 to a 2ds? I wonder.

This is impossible, there is no 2DS with this firmware.

So the NAND dump mod could also work with an XL with the capture card installed? From pictures loopy posted, it looked like the capcard board covered up the points on the motherboard you'd need to solder to.

No Problem to install it. The Capture-Board is just covering it at the picture. You can release the Capture-Board to solder the four points on the XL-Mainboard and then put back the Capture-Board in place. All three models form the Capture-Baord were always removable!