3dscapture.com

I run the program and only see black screen, my computer sees the device and I am getting very frustrated. Please help

Make sure ur using the same USB port you did the first time you installed the board on ur PC.

It might not be this, but test it.

Even tho my board reinstalls on other USB ports, only the original usb port I used to install it on the pc transmits video.

Was the driver installed? Do you see it in Device Manager? Did it stop working, or is this your first time trying to get it running?

I had it working before just now turned black, I tried to update driver and even reinstalled it. I do see the 3ds in device manager, I have tried Usb port 2.0/3.0 and same port I had used previously. I will try more when I get out off class today.

I opened the 3ds capture program again, saw the image upon start then it turned black. So I guess that's progess.

Do you have another USB cable you can test it with?

I will go to fry's and purchase one, I only have the cable that was given to me.

I can send another one out to you. When it goes black, do you also hear it disconnect? If so, it's probably a worn out cable or USB connector. If not, there may be something else wrong with the board.