Page 1 of 1
Issue after install, need help troubleshooting, black screen popping.
Posted: Tue Sep 05, 2023 10:56 pm
by ossnorry
The 3ds has the orange led for charging, if I press and hold the power button the blue second turns on for a second the speakers pop and it turns off. The screen never comes on during this, any idea where I should start?
Re: Issue after install, need help troubleshooting, black screen popping.
Posted: Thu Sep 07, 2023 12:08 am
by loopy
Check that this cable isn't loose.
Re: Issue after install, need help troubleshooting, black screen popping.
Posted: Sat Sep 16, 2023 4:19 am
by ollidab
I'm in the exact same scenario right now. reseated the ribbon cable and no luck
Edit: I'm an idiot... custom firmware was installed and I needed the SD card inserted
Re: Issue after install, need help troubleshooting, black screen popping.
Posted: Thu Feb 08, 2024 8:37 am
by FuwaGhost
Having the same issue at the moment. On my end all the ports are connected, and my SD card is inserted since I have custom firmware installed. Could it have anything to do with the solder points? Or would it still be ribbon related?