Circle Pad Pro

Post Reply
User avatar
TheEpicPrinceFluff
Posts: 7
Joined: Sun Feb 17, 2013 10:44 pm
Location: Down South
Contact:
Contact TheEpicPrinceFluff

Circle Pad Pro

Post by TheEpicPrinceFluff » Sun Feb 17, 2013 10:48 pm

Will the Circle Pad Pro accessory still be able to attach to the 3DS after the capture board is installed?

Cheers.
Top
User avatar
loopy
Site Admin
Posts: 2390
Joined: Wed Sep 19, 2012 7:44 pm
Contact:
Contact loopy

Re: Circle Pad Pro

Post by loopy » Sun Feb 17, 2013 11:18 pm

No.
Top
User avatar
MKGirlism
Posts: 292
Joined: Fri Sep 28, 2012 8:54 pm
Contact:
Contact MKGirlism

Re: Circle Pad Pro

Post by MKGirlism » Mon Feb 18, 2013 4:23 pm

Only if you manage to make your Circle Pad Pro deeper somehow?
I dunno, I don't have one, but anything you can attach at the bottom won't work.
Top
User avatar
loopy
Site Admin
Posts: 2390
Joined: Wed Sep 19, 2012 7:44 pm
Contact:
Contact loopy

Re: Circle Pad Pro

Post by loopy » Mon Feb 18, 2013 5:08 pm

MKGirlism wrote:Only if you manage to make your Circle Pad Pro deeper somehow?
I dunno, I don't have one, but anything you can attach at the bottom won't work.
There's too much stuff under it, it would be easier to raise the IR transmitter instead. I got a CPP to look inside, but I haven't tried it yet.

Image

Image

Image

Image
Top
User avatar
TheEpicPrinceFluff
Posts: 7
Joined: Sun Feb 17, 2013 10:44 pm
Location: Down South
Contact:
Contact TheEpicPrinceFluff

Re: Circle Pad Pro

Post by TheEpicPrinceFluff » Thu Feb 21, 2013 7:09 pm

Is it possible that the capture board could rest inside of the Circle Pad Pro?
Top
User avatar
MKGirlism
Posts: 292
Joined: Fri Sep 28, 2012 8:54 pm
Contact:
Contact MKGirlism

Re: Circle Pad Pro

Post by MKGirlism » Thu Feb 21, 2013 8:28 pm

Could you read the Post right above you?
The answer is right there.
Top
User avatar
loopy
Site Admin
Posts: 2390
Joined: Wed Sep 19, 2012 7:44 pm
Contact:
Contact loopy

Re: Circle Pad Pro

Post by loopy » Thu Feb 21, 2013 9:15 pm

TheEpicPrinceFluff wrote:Is it possible that the capture board could rest inside of the Circle Pad Pro?
You'll need to take the board cover off and do some cutting. It's not a perfect fit, and I worry that the board might come loose or break, but yes, you can make it fit.

Image

Image
Top
RottonboneGaming
Posts: 7
Joined: Thu Feb 21, 2013 1:50 am

Re: Circle Pad Pro

Post by RottonboneGaming » Thu Feb 21, 2013 10:20 pm

Hey fluff I checked out the channel nice job I hope to be successful in Pokemon LPs and since YouTube doesn't have a ton of Zelda content some of that maybe toss a shout out when my channel gets up and running?
Top
User avatar
TheEpicPrinceFluff
Posts: 7
Joined: Sun Feb 17, 2013 10:44 pm
Location: Down South
Contact:
Contact TheEpicPrinceFluff

Re: Circle Pad Pro

Post by TheEpicPrinceFluff » Thu Feb 21, 2013 10:37 pm

loopy wrote:
TheEpicPrinceFluff wrote:Is it possible that the capture board could rest inside of the Circle Pad Pro?
You'll need to take the board cover off and do some cutting. It's not a perfect fit, and I worry that the board might come loose or break, but yes, you can make it fit.

[pictures]

Ah, many thanks for the info. How high do you think the chance is that the board will break with a rig set up like that? Also thanks again for going through the trouble; I want to get a capture board, but the Circle Pad Pro makes the 3DS much nicer to hold for big-handed me. I also need it for when Monster Hunter 3 comes out. ;-;
Top
User avatar
MKGirlism
Posts: 292
Joined: Fri Sep 28, 2012 8:54 pm
Contact:
Contact MKGirlism

Re: Circle Pad Pro

Post by MKGirlism » Fri Feb 22, 2013 7:18 am

Monster Hunter 3 Ultimate can be played totally fine without a Circle Pad Pro, but you should use the Touch Screen more often.
Top
Post Reply

Return to “General”