DIY Install problem
DIY Install problem
Hi loopy, I recently received my two install kits I ordered! This first install went perfect and worked perfectly! The second install was installed the same way but has a slight red tent to the captured screen! I was just wondering if you had any ideas or suggestions how to fix! Thanks.
-
- Posts: 10
- Joined: Sun Mar 10, 2019 1:44 am
Re: DIY Install problem
Is it a red tint, or is it black being replaced with red?
If it's the latter, I'm having the same issue with my first board I installed. Attached is an image of what it looks like on mine! I've sent an email to loopy and am patiently awaiting a response
https://imgur.com/a4mVulV
If it's the latter, I'm having the same issue with my first board I installed. Attached is an image of what it looks like on mine! I've sent an email to loopy and am patiently awaiting a response
https://imgur.com/a4mVulV
Re: DIY Install problem
Hey guys, I had this same issue with discoloration in the capture screen, so I re-soldered everything and it works perfectly now. I'd just go really slow and make sure all the pads are making a connection with the mainboard
Re: DIY Install problem
Yeah. Unfortunately you have to resolder everything. I spent about an hour trying to find if it was a specific point with no success. So I just un did everything and it works fine.
Re: DIY Install problem
Yeah, it's a soldering issue. I updated the software to check which colors are stuck, there's a comment at the end of the install guide about it.