Hi! In the past 3 years I've been using a Loopy DS capture card (bought from Merki) and it has always worked fantastically. I have a Mac, so as capture software I've been using a version of CuteCapture (https://github.com/spitford/CuteCapture) with a few modifications done by myself. Last week I was at an event, where the tech crew connected my DS to their PC. A pop-up appeared, it was something like "Firmware needs to be updated, proceed?" and they clicked on yes. I believe the update was done by Loopy following this discussion viewtopic.php?t=6325&start=10. Now I came home and the output from the capture software flickers a bit: every few frames it "shakes" as if the software wasn't recognizing the start of the new frame correctly. It looks like the same issue as here: https://github.com/Gotos/CuteCapture/issues/17
I want to ask:
- how did the output from the DS change with the new firmware update? (For example, DS used to send data until end of frame, and then 0-length packets: has this changed?) Knowing this could help me re-write the software to fix the problem.
- is there a way to revert the firmware to the previous version?
How does the new firmware work?
Re: How does the new firmware work?
You can revert the firmware. Run the old 3.1 version, then hold Ctrl+Alt and connect the DS.
https://3dscapture.com/ds/ds_capture.3.1.zip
https://3dscapture.com/ds/ds_capture.3.1.zip
Re: How does the new firmware work?
Thank you very much!
- LemBrosGame
- Posts: 39
- Joined: Wed Jul 20, 2022 8:29 pm
- Contact:
Re: How does the new firmware work?
I did try to update the firmware by CTRL + ALT and connect my 3DS. But, it's still glitched after I updated the firmware, no different.
I was wondering if I could buy a USB cord Braided like you use, Loopy.
I use two USB cords without braided and one 3.0 USB cord without braided. Do you think my three USB cords have issues with my 3DS Capture Card during M&L: Dream Team or not? Should I use a USB cord brided? Let me know. Thank you.
Can you see the console debug? I did update the firmware.
I was wondering if I could buy a USB cord Braided like you use, Loopy.
I use two USB cords without braided and one 3.0 USB cord without braided. Do you think my three USB cords have issues with my 3DS Capture Card during M&L: Dream Team or not? Should I use a USB cord brided? Let me know. Thank you.
Re: How does the new firmware work?
Completely different issue. Gimmy is asking about downgrading the firmware on a DS capture board.
- LemBrosGame
- Posts: 39
- Joined: Wed Jul 20, 2022 8:29 pm
- Contact:
Re: How does the new firmware work?
Oh. I understand. That's different of my 3DS and his DS. That means my USB cables are no different from USB braided.