Hello,
Yesterday everything was fine but today when I connect New 3DS to PC with running 3DS Capture app (latest version, re-downloaded it just now) it says "Device firmware needs to be updated. Push Start to begin".
When you press start it fails with error 464. Running the app as admin does not help. Nothing has been changed on my PC - no updates, etc.
Does somebody know anything about it?
Thank you.
UP: tried another PC - same problem. Is it related to some online changes on server side or capture card died?
Error 464 when connecting New 3DS to PC
-
- Posts: 9
- Joined: Sat Oct 07, 2023 10:55 pm
Re: Error 464 when connecting New 3DS to PC
Related to this post. I put up a beta version that might fix the problem. See if it helps.
-
- Posts: 9
- Joined: Sat Oct 07, 2023 10:55 pm
Re: Error 464 when connecting New 3DS to PC
Nope. In this version in debug it says:
Code: Select all
closing
bsId(0CC0B0A1)
fwId(FFFFFFFF)
N3DSXL.2, SN=nxl454611, FW=0, USB2
Code: Select all
bsId(0CC0B0A1)
reset1
204:fail(19)
609:fail
Re: Error 464 when connecting New 3DS to PC
Ah. Of course it would.
I made some changes, see if it works better. If it fails, you can keep trying it but close the program and reconnect rather than use the "Retry" button.
I'll keep leaving the latest test versions on the changelog page.
I made some changes, see if it works better. If it fails, you can keep trying it but close the program and reconnect rather than use the "Retry" button.
I'll keep leaving the latest test versions on the changelog page.
-
- Posts: 9
- Joined: Sat Oct 07, 2023 10:55 pm
Re: Error 464 when connecting New 3DS to PC
Nothing at all, had 50+ attempts.loopy wrote: ↑Fri Oct 13, 2023 6:02 amAh. Of course it would.
I made some changes, see if it works better. If it fails, you can keep trying it but close the program and reconnect rather than use the "Retry" button.
I'll keep leaving the latest test versions on the changelog page.
Once it did not throw the "Update" screen but still showed the black screen (Not connected) and during plugin/unplugin USB it was this in the logs:
Code: Select all
closing
bsId(0CC0B0A1)
515:fail
closing
closing
225:fail(4,C2C0B0A1)
reset1
215:fail(19)
closing
closing
225:fail(16,0CC0B0A1)
reset1
215:fail(19)
closing
closing
bsId(0CC0B0A1)
fwId(FFFFFFFF)
N3DSXL.2, SN=nxl454611, FW=0, USB2
Logs for the "Update":
Code: Select all
closing
bsId(0CC0B0A1)
fwId(FFFFFFFF)
N3DSXL.2, SN=nxl454611, FW=0, USB2
bsId(0CC0B0A1)
433:fail(0xff, 1)
636:fail(461)
-
- Posts: 9
- Joined: Sat Oct 07, 2023 10:55 pm
Re: Error 464 when connecting New 3DS to PC
Replacing capture board with another one did help.