NAND Dump Mod (@loopy)

[GweiTheLeafChild]

Is this for flashing the firmware to what ever you want?

Not really, this is really only for if your 3DS bricks for whatever reason, or if you want to downgrade and upgrade at your leisure.

You can't use another NAND from another 3DS(Yet), as each console's NAND is encrypted to the mainboard it's on.

What you can do, is back up whatever stable firmware that you have, keep it safe, and flash it back to the console.

The closest thing so far to flashing a somewhat custom firmware would be to flash emuNAND (Emulated NAND from an exploit based 3DS flashcart) to the console, but so far, that's only worked until 9.2.

I suppose you can do other things with it, like peek at the NAND dumps with exploratory surgery in a hex editor and whatnot.

[Vappy]

Hrm, once XL boards are out, might send Tecd0c an email asking if he'd be willing to install the NAND dump mod as well as the capture card, if I pay a little extra for it.

[fntcxx]

Hrm, once XL boards are out, might send Tecd0c an email asking if he'd be willing to install the NAND dump mod as well as the capture card, if I pay a little extra for it.

I'ma do the same if loopy gets the 3DS XL capture card + (gamecube) controller mod under one roof and Tecd0c sells it. I finally want to play 3ds without my thumbs hurting after 10 minutes - and be able to switch back and forth between firmwares.