3D capturing

Post Reply
User avatar
loopy
Site Admin
Posts: 2390
Joined: Wed Sep 19, 2012 7:44 pm
Contact:
Contact loopy

Re: 3D capturing

Post by loopy » Sat Jun 15, 2013 8:02 pm

Greenalink wrote:I am trying to take out the board right now but I am really concerned about the orange ribbon cable connected to the capture board. How do I take it out without damage?
There's a little black tab on the connector that locks it in place. You need to flip it up first, then it should slide out easily.

Image
Top
Greenalink
Posts: 32
Joined: Sat Sep 22, 2012 12:04 pm

Re: 3D capturing

Post by Greenalink » Sat Jun 15, 2013 8:06 pm

Took the orange ribbon cable out, is the motherboard stuck with double sided tape? Is there a way to take it out without having to unscrew more parts of the 3DS?
Top
User avatar
loopy
Site Admin
Posts: 2390
Joined: Wed Sep 19, 2012 7:44 pm
Contact:
Contact loopy

Re: 3D capturing

Post by loopy » Sat Jun 15, 2013 8:10 pm

Yes, it's just stuck down with tape. You don't need to unscrew anything.
Top
Greenalink
Posts: 32
Joined: Sat Sep 22, 2012 12:04 pm

Re: 3D capturing

Post by Greenalink » Sat Jun 15, 2013 8:18 pm

Thank you, I can confirm that the capture board is now out. I'll send it to the post office this Monday/Tuesday at the earliest.

:)
Top
MakiManPR
Posts: 143
Joined: Tue Feb 19, 2013 7:24 pm

Re: 3D capturing

Post by MakiManPR » Mon Jun 24, 2013 6:35 am

I just made a new 3D Test

https://www.youtube.com/watch?v=SA4HIZYYW5g
Top
Post Reply

Return to “General”